5.8GHz Microwave Motion Detector Light Switch 220-240VAC 1200W

       Product Specifications:

         Ceiling Motion Sensor, 5.8GHz Microwave Motion Detector Light Switch 220-240VAC Rated 1200W, Ceiling Mount Motion Detector, 32-Ft Range, White

• Power Supply: 220-240VAC
• Power Frequency: 50/60Hz
• Installation Sit: Ceiling Mounting
• HF System: 5.8GHz CW Redar, ISM Band
• Transmission Power: <10mW
• Rated Load: 1200W (220-240VAC)
• Detection Angle: 360°
• Reach: 1-8m (radii.), Adjustable
• Time Setting: 8sec to 30min
• Light Control: 2 ~ 2000Lux
• Power Consumption: approx. 0.9W
• Dimension: 98mm x 47mm
• |NEXT GEN PIR | This microwave sensor emits microwave signals to detect moving objects, the same way a radar speed detector works. It is more accurate and consistently outperforms a PIR motion sensor, which tends to be less sensitive in high temperature and over sensitive in low temperature.
• | SLEEK DESIGN | Clean and modern profile with a classic UFO shape. Body housing made with premium polycarbonate material stronger than ABS plastic and gives a beautiful smooth finish. Standard white low profile allows this sensor to blend seamlessly into your ceiling.
• | BETTER DETECTION | Features 360-degree detection with 30-ft diameter detection range. Radar waves are capable of penetrating glass, paper, plastic and thin walls. Sensitivity of this sensor can be adjusted by turning the knob on the body of sensor.
• | PHOTOCELL ENABLED | With built in photocell operated by switch for daylight (24/7 mode) or night mode (only trigger after dark), making the sensor a perfect replacement of PIR sensors.
• | SAFE TO USE | This sensor emits microwave power at 10 milliwatt, which is 1/100 of a normal cell phone (typically 1-2 watts of power). Suggested install height 8-12 ft., compared to a cellphone which is normally used within 3 ft. You can use this radar motion detector safely and with peace of mind.
• Where to Use: Use in walkway or corridor automatic lighting at night. Install in garage and basement for automatic lighting control. Install at the front of your shop or office for automatic door activation. Install on the ceiling of your laundry room for lighting when your hands are full. Connect to alarm to detect break-in to your house.